Description
The Kryo 1060 is a large capacity controlled rate freezer for higher volume storage - Kryo 1060
The system's sample capacity is sufficient for most intense process situations.
A top opening chamber, combined with a unique forced laminar flow pattern of the coolant and its cryogenic insulation, ensures even and accurate temperature control at all phases of the freezing protocol. The stainless steel finish enables wipe clean functionality and ruggedness.
Suitable for volume cell line or vaccine storage, this liquid nitrogen CRF has system safety protection with a -100 ºC end temperature to ensure sample integrity during transfer to cryo storage.
This top opening stainless steel freezer is ideal for precise freezing of samples in high volumes, such as volume cell line or vaccine storage.
Even and accurate temperature control, in all phases of the protocol, are possible due to the unique forced laminar flow pattern of the coolant and cryogenic insulation.
The -100 °C end temperature ensures sample integrity during transfer to storage, whilst the high capacity liquid nitrogen cylinder offers a large cooling reservoir with an extended hold time at the protocol end temperature.
Batch freezing is possible using our DeltaT software. Large sample numbers can be deposited in different machines with the subsequent freezing profile for all samples being displayed on the same graph.
Benefits:
- Optimum post thaw sample integrity - efficient and even freezing
- Passwords and Safety features
- Repeatable process - suitable for validation
- Preview Programmes before running
- Mechanically aided top opening design
- Freeze samples in vials or other containers in baskets
- Communications port for PC connection
- User calibration with associated hard copy possible
Features
Features:
- Chamber volume: 180 or 380 litres
- Vial capacity: 4000/8000 x 2 ml in baskets
- Lower temperature limit: -100 ºC
- Cooling rates: -0.01 to -5 ºC/min
- Controlled heating rates: 0.1 to 1 ºC/min
- System controller: Planer's KS1
- PC Software: Planer's DeltaT
- High capacity LN2 cylinder: large cooling reservoir - extended hold times
View via a monitor and print out on a network printer. PC connection compatible with Planer’s Delta T™ management software. The PC offers the widest range of displayed information during and after a run. The Controller is designed to be simple to program and operate and the system has many safety features eg: to help protect against power or PC failure when running with software. Planer's DeltaT-iQ software offers password controlled access on multiple user levels; time and date stamping for verification.
Specifications
| Kryo 1060 - 180 Technical Specifications |
|---|
| Dimensions | External | Internal |
|---|
| Height |
112cm |
64cm |
| Width |
86cm |
50cm |
| Depth |
116cm |
50cm |
| Weight |
211kg (shipping weight includes Packaging) |
| Capacity (Vials) |
4000 x 2 ml vials |
| Kryo 1060 - 380 Technical Specifications |
|---|
| Dimensions |
External |
Internal |
| Height |
112cm |
64cm |
| Width |
132cm |
100cm |
| Depth |
116cm |
50cm |
| Weight |
423 kg (shipping weight includes Packaging) |
| Capacity (Vials) |
8000 x 2 ml ampoules |
| Circulation |
Horizontal laminar flow |
| Temperature Range |
+40 o C to -100 o C. Warning! The freezer is fitted with a manually-resettable thermal cut-out to prevent over heating. This will operate if the chamber is programmed to run above +40 o C and will require a Service Engineer to reset it. |
| Cooling Medium |
Liquid Nitrogen 22 -30 psi |
| Heater |
1700W |
| Accuracy |
±0.5°C at a hold at 0°C (dynamic accuracy depends on actual programme, e.g. Rate of change of temperature) |
| Heating Rates |
0.01°C/min to 1°C/min |
| Cooling Rates |
-0.01°C/min to -10°C/min |
| Power Requirements |
230V~ 50/60hz, 16a (max.) The freezer may be damaged by voltage surges in excess of 15% above nominal. |
| Standards |
Complies with 89/336/EEC EMC Directive as amended by 93/68/EEC and 73/23/EEC Low Voltage Equipment Directive as amended by 93/68/EEC. |
| Storage Temperature |
-10°C to +60°C |
| Storage Humidity |
Up to 95% non-condensing |
| Operating Temperature |
+5°C to 40°C |
| Operating Humidity |
Less than 90% non-condensing |
| Additional Equipment Recommendations |
| 22 psi System |
System Cylinder - MVEUROCYL230SB Phase Separator - MVPHASE |
| 22 psi System (alternative) |
Vacuum Jacketed Pipe Work System Phase Separator - MVPHASE |
