Nuaire FumeGard 162 Conventional Fume Hood

PDFPrintEmail
The FumeGard 162 Conventional Corrosive-Resistant Polypropylene Fume Hood is designed to capture, contain, and exhaust fumes, gases, vapors, mists, aerosols, and particulate matter generated within the hood interior.
Request Quote
Download Brochure

Nuaire FumeGard 162 Conventional Fume Hood

Features

Durable Polypropylene Design
The FumeGard NU-162 is built primarily of stress-relieved polypropylene to which NuAire has added anti-oxidizing agents and UV stabilizers. This increases tensile strength and improves thermal characteristics. NU-162 has a single piece airfoil across the bottom of the work access opening. As the sash is lowered, the face velocity increases rapidly. Fumes, gases, vapors, aerosols, and particulate are drawn through vents by an exterior exhaust duct. Å“Double wall construction forms the plumbing chase for routing and connecting all services. This compartment is under negative pressure to minimize fume build-up.

Setting the Performance Standard
NU-162 FumeGard has been independently tested to meet and exceed the requirements of ASHRAE Standard 110-1995 and is SEFA 1-1992 certified.

Applications for All
NuAire polypropylene products have been used in Chemical Engineering, Electrical Engineering, Material Science, Environmental Toxic Analysis, Analytical Chemistry, Metallurgy, Water Treatment Facilities, Toxicology, Trace Metal Analysis, Marine Science, Waste Management, Soil Science, Semiconductor, and more.


Superstructure Constructed from 1 - ž2 (13 mm) Stress Relieved, All Seam Welded Polypropylene
All Negative Pressure Interior
Cool White Fluorescent Lighting
Electronic Fluorescent Lamp Ballast
Counterbalanced Lexan® View Screen Slides 18 (457 mm) Maximum Opening to Fully Closing
Flush Mounted Exterior/Interior Plumbing Chase Access Panels
Connection Provided for Venting a Base Cabinet
Removable Rear Baffle for Maintenance
Reinforced 1 - ž2 (13 mm) Thick Polypropylene Work Surface
Lower Work Access Opening Airfoil
PVC Electrical Junction Box
Modular Electrical Component Construction


Optional Features
PVDF Lined Interior or Flame Retardant Polypropylene Fume Hood
Composition Stone/Modified Epoxy Resin Work Surfaces
Air Flow Alarm Systems
Remote Controlled Service Valves for Air, Vacuum, and/or N2
Cascade or Single Rinse Tanks with/without Nitrogen Purge
Rear Exhaust Duct Wash-down System
Polypropylene, Teflon® or PVDF Gooseneck Faucets
Custom Polypropylene Sinks with Chemically Resistant Å“P-Trap
Teflon®, PVDF, or Polypropylene Dip Tanks with/without Drains
Polypropylene or PVDF Sinks with Hot/Cold or D.I. Water Faucets
Teflon® Liquid/Air Aspirators to Syphon Chemicals
D.I. Water or N2 Teflon® Spray Guns
Exhaust Interlocks for Building Controls
Polypropylene Exhaust Damper with Quadrant Lock
Ground Fault Circuit Interrupter for Duplex Outlet(s)
Additional Duplex Outlet(s) with PVC Covers
PDF File

Reviews

There are yet no reviews for this product.